Torso UVs for G3F Anatomical Elements by CaymanStudios ()

3D Figure Essentials • 6176 downloads

Software:   Daz Studio 4

Base Figures:  Genesis 3 Female, Genesis 8 Female

License:  This is licensed for commercial or non-commercial use.

Report this item. 

Product Notes

This UV Set for the Genesis 3 Female Genitalia will enable you to use the G3F genital geograft with G3F characters which do not include a separate genital texture (for example, the default G3F Jeane texture). It derives the texture from the torso texture as previous generations of Genesis have done.

This UV Set is for the Genesis 3 Base Female.

There are no user-facing files. The UV Set is to be found in the Surfaces tab for the Genitalia. See the ReadMe file for full instructions.

NEW NOTE (June 2017): This UV Set can also be used on Genesis 8 Female, because the UVs are identical. Simply rename the "Genesis 3" folder as "Genesis 8" and install it as instructed in the ReadMe.

DAZ Studio only.

Best Selling Marketplace Items by This Vendor

Freestuff Comments

CaymanStudios ( posted at 4:05AM Fri, 27 April 2018

Brendon, did you rename the "Genesis 3" folder to "Genesis 8" as instructed in the Product Notes (above)? If you continue to have problems you can send me a Sitemail.

Brendon12343 ( posted at 2:22AM Fri, 27 April 2018

I followed the instructions multiple times, though the anatomical elements remain gray. Trying to do this with Genesis 8 figure.

shonsu ( posted at 12:41PM Mon, 12 March 2018

Another Thank you here as well and when there is a texture map for the character, the UV set works beautifully.

ProtocolZero ( posted at 11:27PM Sat, 10 March 2018

Thank you!

Satariel ( posted at 10:49PM Wed, 19 July 2017


CaymanStudios ( posted at 12:03PM Sat, 08 July 2017

Brockton, the Parent folder is whichever folder is immediately above the "data" folder within your DAZ folder set-up. Usually it's "My Library", or something similar. So the data folder will merge with the pre-existing data folder.

brockton ( posted at 8:33AM Sat, 08 July 2017

I'm stupid but where exactly am I supposed to place the files? I can't find any named "Parent" anywhere. Should I place it in "My DAZ 3D Library", or elsewhere?

DrHemulen ( posted at 3:49PM Tue, 27 June 2017

Thank you very much. This is extremely useful. I actually prefer this to using the "correct" maps for V7. The normal genital maps have a hi-res bump map, that looks weird. No normal map either. Your UVs fix both issues.

Angel_Wings ( posted at 1:33PM Tue, 27 June 2017

Cant wait for G8. Should be easy enough, Considering its the same UV Map.

miketee10021 ( posted at 3:45PM Sat, 24 June 2017

Thank you!!

CaymanStudios ( posted at 4:48PM Thu, 11 May 2017

CajunBeauty, I have sent you a site mail in response to your question.

CajunBeauty ( posted at 11:22AM Thu, 11 May 2017

" I suppose you could use it to gauge the precise position of the genitalia on G3F and so help with the texture creation"

How do I go about doing that?

ptrope ( posted at 8:52PM Mon, 17 April 2017

OK, got it to work - you can't just choose the item and its materials in the Surfaces tab - you have to also select the item in the scene assets. Sheesh.

ptrope ( posted at 8:48PM Mon, 17 April 2017

Can't get this to work, but I'm sure it's not this product at fault. The geograft has different nodes than the V7 torso material, so pasting the material from one to the other doesn't work - this is not the first time I've encountered this. I've even tried applying the DAZ Iray Uber Base to the geograft and nothing changes - still the same incompatible nodes.

Basically, DAZ doesn't really want anyone using genitalia, I think ;).

CaymanStudios ( posted at 3:13AM Sun, 02 April 2017

CajunBeauty, this is a UV set for the DAZ Anatomical Elements geograft which is sold with the Pro Packs. It simply enables the genital area of the Torso texture to be shown on the geograft. I suppose you could use it to gauge the precise position of the genitalia on G3F and so help with the texture creation, but you cannot include this product with a character you might sell, and it wouldn't really make much sense to do it anyway.

CajunBeauty ( posted at 7:43PM Sat, 01 April 2017

Can I use this to add my gens to the characters I make for sale?

CaymanStudios ( posted at 5:54PM Tue, 14 March 2017

chuntuk, most G3F characters use the Base Female UVs. Other UVs are usually restricted to the original character with the "7" after it, and those have their own special genital textures in any case, so the Torso UVs would be unnecessary. There may be a handful of others which might benefit from this - but the numbers are very small in comparison to the hundreds which use the Base Female UVs. For that reason it is unlikely that I will do any more of these.

chuntuk ( posted at 5:08PM Tue, 14 March 2017

Fantastic. Does exactly what it says on the tin.

Don't suppose you'd consider expanding it to cover the other UVs, in particular V7?

timetwist ( posted at 11:22AM Thu, 05 January 2017

If you have trouble applying the figure texture, try applying the Iray Uber Base (Shader Presets -> Iray -> DAZ Uber -> !Iray Uber Base) to the geograft genitalia surface first. Then copy the torso surface from G3F and paste it onto the genitalia surface of the geograft.

CaymanStudios ( posted at 9:41AM Wed, 09 November 2016

gobSIDES, this is a UV Set for the Genitalia geograft which only comes with one of the G3F Pro Bundles (like Victoria 7 or Lilith 7) sold at DAZ. If you do not have this then this product will not work. If you do have it, and you have installed the files correctly you should see the UV Set "Base Female Torso UVs" available for you to pick under the Surfaces tab for the Genitalia. This UV Set will only work correctly and align the textures for G3F characters with the "Base Female" UV (so not for Victoria 7 herself).

I have also sent this response to you as a Sitemail.

gobSIDES ( posted at 4:37AM Wed, 09 November 2016

Followed intall but can't figure out how to load?

Sorry I'm new to this

chriscline ( posted at 8:19AM Wed, 22 June 2016

solves a major problem thanks

rochdale ( posted at 2:09AM Fri, 01 April 2016

this has proved to be very useful.

good work and thank you.


savanna ( posted at 2:49AM Sun, 27 March 2016

Thank you and happy Eastern :)

toenail ( posted at 6:20PM Mon, 14 March 2016

Thank's man, cool.

RedzStudio ( posted at 12:02PM Mon, 14 March 2016

Thank you so much for this Cayman :)

sapat ( posted at 10:03AM Wed, 09 March 2016

Awesome, thanks!

jerife ( posted at 7:44PM Sun, 28 February 2016

Thanks a lot Cayman, it works wonderfully

Oblomov ( posted at 9:34PM Sat, 27 February 2016

Many thanks

ESPe71 ( posted at 8:23AM Wed, 24 February 2016

Good job. Thank you.

Privacy Notice

This site uses cookies to deliver the best experience. Our own cookies make user accounts and other features possible. Third-party cookies are used to display relevant ads and to analyze how Renderosity is used. By using our site, you acknowledge that you have read and understood our Terms of Service, including our Cookie Policy and our Privacy Policy.