Dress-wise, I was thinking maybe something like this...

Since you've already come a long way with it, I would suggest the dress. 

Looks gorgeous on her.  A dress like that would be great!

Another vote for the dress

Well, I am quite fond of this dress, and she doesn't have one yet, at least not from the odf collection. :-)

I LOVE the dress! Looking forward to more renders with it, Olaf! 

I LOVE the dress! Looking forward to more renders with it, Olaf! 

Anim8dtoon posted at 8:54 PM Wed, 29 March 2023 - #4459910

I LOVE the dress! Looking forward to more renders with it, Olaf! 

It's actually based on a swimsuit I saw a photo of and tried to recreate in MD, then modified into a dress.

odf posted at 5:46 AM Tue, 28 March 2023 - #4459758

Dress-wise, I was thinking maybe something like this...

Hmm, I hope this pose is less ominous.

Nope I ain't going to say it

Hmm, I hope this pose is less ominous.

Careful, if you tease me to much, all future clothes will be demin. :-D

Careful, if you tease me to much, all future clothes will be demin. :-D

Anyway: the pose is great and the dress is awesome 

The wrinkles in the middle part make the simulation a bit sluggish because they need extra resolution, but I think they're worth it.

Just for the record: Antonia1.3 was used extensively in the beta testIng for Poser13. I kept her in because of the hip-is-child-of-waist hierarchy. 

I found no particular issues.

Just for the record: Antonia1.3 was used extensively in the beta testIng for Poser13. I kept her in because of the hip-is-child-of-waist hierarchy. 

I found no particular issues.

I've got another dress in the works that I'm quite fond of, but it's going to need some knockers-proofing, if you forgive the expression.

Nice! 😍

After years of absence, Antonia looks still good, Jus a question: Is it still the "old" Antonia or is there a new mesh available?

Hi Ulli,

It‘s Antonia 1.3 now, with some updates to the mesh and rigging. Check out my FreeStuff section here on Rendo.

Thanks for th quick response.

odf posted at 5:42 AM Sun, 2 April 2023 - #4460467

Hi Ulli,

It‘s Antonia 1.3 now, with some updates to the mesh and rigging. Check out my FreeStuff section here on Rendo.

odf posted at 5:42 AM Sun, 2 April 2023 - #4460467

Hi Ulli,

It‘s Antonia 1.3 now, with some updates to the mesh and rigging. Check out my FreeStuff section here on Rendo.

She's still Antonia 1.3 with all the work you've done on/for her?

My last version way back before the hiatus was Antonia 1.2. Then the slightly updated Antonia 1.3 was published last October. When Poser has full support for unimesh figures, I'll think about an Antonia 2.

odf posted at 5:30 PM Sun, 2 April 2023 - #4460551

Y-Phil posted at 7:23 AM Sun, 2 April 2023 - #4460476

odf posted at 5:42 AM Sun, 2 April 2023 - #4460467

Hi Ulli,

It‘s Antonia 1.3 now, with some updates to the mesh and rigging. Check out my FreeStuff section here on Rendo.

She's still Antonia 1.3 with all the work you've done on/for her?

My last version way back before the hiatus was Antonia 1.2. Then the slightly updated Antonia 1.3 was published last October. When Poser has full support for unimesh figures, I'll think about an Antonia 2.

Some progress with Dress #2. Sorry to those who preferred the malfunctioning version. :-D

I'm planning to get Poser 13 next weekend as to avoid the initial run and test Dress #1 with it before putting it on FreeStuff. If #2 is also ready by then, I'll probably publish them as a pack. I still have to make some original materials for the dresses, though. While I do like to recycle bits and pieces of my shaders, I don't like to just reuse a complete material.

I've been having fun making materials for the dresses. I gave them matching material zones, so that they can share. There'll also be a material that allows Antonia to show off fancy underwear while technically still being dressed. Not that I've promised her any fancy underwear, mind you, but a girl can, and will, dream.

I just saw that Antonia 1.3 now has 1000 downloads. Happy downloadiversary, I guess? :-D

Happy download birthday Antonia and well done odf

Wow, great news 

I forgot to mention that the dresses are now in FreeStuff. And here's a sneak peek of the next thing I'm working on (not the shorts, those are old and just there for modesty reason).

Here's the first go at a matching pair of bottoms.

It took a while, but the Jinny starter pack for Antonia is now online in  freestuff: https://www.renderosity.com/freestuff/items/95042/antonia-for-jinny-starter-pack

Nice work, FVerbaas! I still haven't tried out Jinny yet, but I had a quick look in MD.

In the meantime, I've been busy working on a couple of dynamic underwear/bikini sets. I ran into various problems during testing, but by and by I think I'm getting close to something publishable. It might still take a while if more issues pop up or I get ambitious, though. We'll see...

I crossed the bra straps in the back to keep them from sliding off her shoulders, so in the interest of realism I had to make it look like the bra opens in the front. :-)

The materials, among other things, feature a houndstooth pattern and a hex grid, both of which I'm rather proud to have made in the Poser material room because, well, the Poser material room.

For design idea puposes [sic]

Anhelina Skrpchk

That reminds of how one of my exes and I always used to talk about needing a rich, skinny roommate whenever we walked past the lingerie section of the department store.

Well, that link inspired me to make the panties more, umm, aerodynamic?

Y-Phil posted at 7:23 AM Sun, 2 April 2023 - #4460476

odf posted at 5:42 AM Sun, 2 April 2023 - #4460467

Hi Ulli,

It‘s Antonia 1.3 now, with some updates to the mesh and rigging. Check out my FreeStuff section here on Rendo.

She's still Antonia 1.3 with all the work you've done on/for her?

My last version way back before the hiatus was Antonia 1.2. Then the slightly updated Antonia 1.3 was published last October. When Poser has full support for unimesh figures, I'll think about an Antonia 2.

odf posted at 5:30 PM Sun, 2 April 2023 - #4460551

Y-Phil posted at 7:23 AM Sun, 2 April 2023 - #4460476

odf posted at 5:42 AM Sun, 2 April 2023 - #4460467

Hi Ulli,

It‘s Antonia 1.3 now, with some updates to the mesh and rigging. Check out my FreeStuff section here on Rendo.

She's still Antonia 1.3 with all the work you've done on/for her?

My last version way back before the hiatus was Antonia 1.2. Then the slightly updated Antonia 1.3 was published last October. When Poser has full support for unimesh figures, I'll think about an Antonia 2.

What do you think of? Are you planning to make adjustments to the geometry?

Here's the obligatory material parade for Antonia's new undies, soon coming to a free stuff section near you. Originally, I meant to make two sets, but these things are tricky, so just the one it is. Still not perfect, but I'm reasonably happy with how they turned out.

Gorgeous parade 🤩

Thank you so much, Y-Phil!

The undies are up on FreeStuff now. I think I might make her a hoodie next, which seems to be sort of an MD rite of passage. That said, if anyone has an urgent need for a different kind of garment, let me know.

First test of the hoodie to be.

Looks like a hoodie, I think. Still debating whether to add some detail to the seams, but overall, I'm happy with the shape. No zipper, because while I love having one in the physical world, that would just be too painful to get to work in Poser. On to the testing and texturing...

Very nice hoodie. Now let see how it can be simulated in Poser.

So far it looks like it's simulating okay in Poser. I haven't tried hair yet, though.

For hair it may help to put a suitably shaped 'helmet' on Antonia's head and use that as collision actor in lieu of the hair. This may  drastically reduce the number of colision vertices and the difficult 'edge collision' conditions are avoided. 

You can also easily morph the hair to be inside the helmet. (morph brush) 

Yep, the hair helmet is a good idea, I think. Also, I’ll probably make it load with the hood down as the default and include a morph for pulling it up. And another morph for rolling up the sleeves if MD lets me do it.

Hoodie with hood down and sleeves rolled up. 

And here's one with the hood up over hair. The "collision helmet" in this case is just a copy of the head mesh, excluding the face but including the ears. The collision distance is set to 0.5 for Antonia and 1.2 for the "helmet". Setting it higher for all of Antonia smooches the rolled-up sleeves. I also had to shrink the panties a bit in frame 1 to keep them from poking through the hoodie (same as in the previous image).