I want to create an oreo cookie. I know how to create the general shape, but when it comes to adding all of the texture, I am not quit sure of the bust way to do that? I am thinking a displacement map. I could get an actual cookie and scan in the top and bottom of the cookie. But how would I get the little ridges around the edges of the cookie?

Thanks,
Steve

Hi Flatten cylinder increase ring segments as needed make editable loop  select sides& ring select one outer ring of polys on top very slight matrix extrude drop onto hypernurb object. 8 minutes of "modeling"

Very rough example here obviously you would increase ring segment
on the sides

I did  not bother with the Dsplmnt map for the top pattern on the cookie
but you get the point.

Cheers

Try using a B/W image of the oreo with the Vectorizer in C4D, maybe something like this:

upload.wikimedia.org/wikipedia/commons/thumb/3/35/Vector_Oreo.svg/266px-Vector_Oreo.svg.png

> Quote - Try using a B/W image of the oreo with the Vectorizer in C4D, maybe something like this: > > [ upload.wikimedia.org/wikipedia/commons/thumb/3/35/Vector_Oreo.svg/266px-Vector_Oreo.svg.png](http://upload.wikimedia.org/wikipedia/commons/thumb/3/35/Vector_Oreo.svg/266px-Vector_Oreo.svg.png)

Excellent resource!!
Here is My attempt but I cant figure out how to smooth the hard edges
any Ideas???

Cheers

Marzipan, Oreo's and Peas... Foods that make me shiver at just the thought of having to eating them! - Sorry irrelevant post ;-)

Had a play with displacement (couldn't find the vectorizor thingy) I think a better model would've helped and a bit more noise around the edge of the displacement map.

Nurbster that looks perfect, nice work on the displacement :-)

Quote - Had a play with displacement (couldn't find the vectorizor thingy) I think a better model would've helped and a bit more noise around the edge of the displacement map.

 

Following your settings i cant get the same results, even with the same displacement map using that same graphic. I can get the top to look good only on a disc. How did you model this? I tried using a cylindar as well. Thanks!

I can take a look in my backup folder to see if i have the file, but looking at the post, it was 3 years ago.

You're in luck, well kinda.

I didn't have the original picture used for the displacement, so I used the small one I included in the above image.

If you Google "oreo cookie vector" it'll give you a few pictures you can use as a starting point.

The file includes the small image, and was done in V11. I never upgraded and I don't work in the industry anymore so i'm unsure it will work in the latest version?

 

Any problems give me a shout and i'll answer it next time i'm here, probably in a couple of years!

Cheers

So what format can I upload this file as?

Tried ZIP and .C4D but both failed to upload

Rename the .zip to say .txt and you can upload it. Just put a note in your post that the downloader will have to change the file extension once it's downloaded.

/Anders

Thanks, here goes...

Whoever dowloads this, you must change the file name from biccy.txt to biccy.zip

Still can't upload

8*(

Hmmm, that's strange... You could perhaps try a hosting service like http://www.tinyupload.com/ and then post the link here?

/Anders