I want to create an oreo cookie. I know how to create the general shape, but when it comes to adding all of the texture, I am not quit sure of the bust way to do that? I am thinking a displacement map. I could get an actual cookie and scan in the top and bottom of the cookie. But how would I get the little ridges around the edges of the cookie?

Thanks,
Steve

Hi Flatten cylinder increase ring segments as needed make editable loop  select sides& ring select one outer ring of polys on top very slight matrix extrude drop onto hypernurb object. 8 minutes of "modeling"

Very rough example here obviously you would increase ring segment
on the sides

I did  not bother with the Dsplmnt map for the top pattern on the cookie
but you get the point.

Cheers

My website

YouTube Channel

Try using a B/W image of the oreo with the Vectorizer in C4D, maybe something like this:

upload.wikimedia.org/wikipedia/commons/thumb/3/35/Vector_Oreo.svg/266px-Vector_Oreo.svg.png

> Quote - Try using a B/W image of the oreo with the Vectorizer in C4D, maybe something like this: > > [ upload.wikimedia.org/wikipedia/commons/thumb/3/35/Vector_Oreo.svg/266px-Vector_Oreo.svg.png](http://upload.wikimedia.org/wikipedia/commons/thumb/3/35/Vector_Oreo.svg/266px-Vector_Oreo.svg.png)

Excellent resource!!
Here is My attempt but I cant figure out how to smooth the hard edges
any Ideas???

Cheers

My website

YouTube Channel

Marzipan, Oreo's and Peas... Foods that make me shiver at just the thought of having to eating them! - Sorry irrelevant post ;-)

Had a play with displacement (couldn't find the vectorizor thingy) I think a better model would've helped and a bit more noise around the edge of the displacement map.

Nurbster that looks perfect, nice work on the displacement :-)

Quote - Had a play with displacement (couldn't find the vectorizor thingy) I think a better model would've helped and a bit more noise around the edge of the displacement map.

 

Following your settings i cant get the same results, even with the same displacement map using that same graphic. I can get the top to look good only on a disc. How did you model this? I tried using a cylindar as well. Thanks!

I can take a look in my backup folder to see if i have the file, but looking at the post, it was 3 years ago.

You're in luck, well kinda.

I didn't have the original picture used for the displacement, so I used the small one I included in the above image.

If you Google "oreo cookie vector" it'll give you a few pictures you can use as a starting point.

The file includes the small image, and was done in V11. I never upgraded and I don't work in the industry anymore so i'm unsure it will work in the latest version?

 

Any problems give me a shout and i'll answer it next time i'm here, probably in a couple of years!

Cheers

So what format can I upload this file as?

Tried ZIP and .C4D but both failed to upload

Rename the .zip to say .txt and you can upload it. Just put a note in your post that the downloader will have to change the file extension once it's downloaded.

/Anders

Gallery | Store | dogday-design.se

 

 

Thanks, here goes...

Whoever dowloads this, you must change the file name from biccy.txt to biccy.zip

Still can't upload

8*(

Hmmm, that's strange... You could perhaps try a hosting service like http://www.tinyupload.com/ and then post the link here?

/Anders

Gallery | Store | dogday-design.se