Genesis 3 to Poser-FREE Utility Help F.A.Q (Last Updated: 2023 Sep 06 11:48 am)
I'm having a bit of a problem. I have followed WillDial's suggestion on tutorial on export Gen3 figure to Daz DSON import. Upon importing said figure, it doesn't show up. What's going on?
Thanks
____________________________________________________________________________________________________________________________
Asus N50-600 - Intel Core i5-8400 CPU @ 2.80GHz · Windows 10 Home/11 upgrade 64-bit · 16GB DDR4 RAM · 1TB SSD and 1TB HDD; Graphics: NVIDIA Geforce GTX 1060 - 6GB GDDR5 VRAM; Software: Poser Pro 11x
Basically, DSON Importer is trying to read all the daz character files to create the figure in Poser. However, DSON importer doesn't really cross Content Folders.
I cover the issue in the webinar here: https://www.youtube.com/watch?v=mEfMP7aQ-NE
willdial posted at 9:47PM Thu, 21 December 2017 - #4320794
Basically, DSON Importer is trying to read all the daz character files to create the figure in Poser. However, DSON importer doesn't really cross Content Folders.
I cover the issue in the webinar here: https://www.youtube.com/watch?v=mEfMP7aQ-NE
I see, so the problem would be DSON or having the correct version of it. I'll check out the webinar an may return with update. Thanks, Willdial for the response.
____________________________________________________________________________________________________________________________
Asus N50-600 - Intel Core i5-8400 CPU @ 2.80GHz · Windows 10 Home/11 upgrade 64-bit · 16GB DDR4 RAM · 1TB SSD and 1TB HDD; Graphics: NVIDIA Geforce GTX 1060 - 6GB GDDR5 VRAM; Software: Poser Pro 11x
I checked out your webinar again, and it appears my Base Directory is not into the Poser 11 Content. Would that be the case? See attached.
____________________________________________________________________________________________________________________________
Asus N50-600 - Intel Core i5-8400 CPU @ 2.80GHz · Windows 10 Home/11 upgrade 64-bit · 16GB DDR4 RAM · 1TB SSD and 1TB HDD; Graphics: NVIDIA Geforce GTX 1060 - 6GB GDDR5 VRAM; Software: Poser Pro 11x
willdial posted at 11:06PM Fri, 22 December 2017 - #4320860
That could be the case. Like I said the webinar, I install my DAZ files into the same Content folder as my Poser stuff. So I always in the same content folder.
Thanks. I will try that out.
Happy Holidays.
____________________________________________________________________________________________________________________________
Asus N50-600 - Intel Core i5-8400 CPU @ 2.80GHz · Windows 10 Home/11 upgrade 64-bit · 16GB DDR4 RAM · 1TB SSD and 1TB HDD; Graphics: NVIDIA Geforce GTX 1060 - 6GB GDDR5 VRAM; Software: Poser Pro 11x
Content Advisory! This message contains nudity
I am also having issues with Genesis 8! First screen cap when I try to put a comma' in the "Genesis3PoserUpdater.exe.config" file I keep getting this banner.I am the administrator of my computer.When I go to set permanently "Run as Administrator" it does not show up in the properties! Secondly again when I try to import Genesis 8 Female I get this Banner! Any assistance would be helpful. Cheers
Custom built computer 128 gigs RAM,2 Terrabyte hard drive, NVIDIA RTX 3060 12 Gig, Intel i9, Dual Dell Screens, 0/S Windows 10, networked to a Special 12th Generation intel I9, RTX 3060 12 Gig, Windows 11,64 gigs RAM, Dual Phillips Screens, 2 Terrabyte SSD Hard Drive plus 1 Terrabyte Hard Drive,3rd Computer intel i7,64 gigs ram, Graphics Card NVIDIA GeForce GeForce 1660 Ti 6 Gig,1 Terrabyte Hard Drive, OS Windows 10 64 Bit Dual Samsung Syncmaster 226bw Screens.Plus Lenovo Laptop 64 Bit,12 gigs Ram.Intel i7 chip.Windows 10 Pro and Ultimate. 4 x 2 Terrabyte Hard Drives and 2 x 2 Terrabyte external USB Hard drives. All Posers from 4 to Poser 2010 and 2012, 2014. Poser 11 and 12, 13, Hexagon 2.5 64 Bit, Carrara 8.5 Pro 64 bit, Adobe Photoshop CS4 Creative Production Suite. Adobe Photoshop CC 2022, Vue 10 and 10.5 Infinite Vue 11 14.5 Infinite plus Vue 15 and 16 Infinite. DAZ Studio 4.20, iClone 7 with 3DXchange and Character Creator3, Nikon D3 Camera with several lenses. Just added 2x 2 Terrabyte portable hard drives.
Hi! When I try to use some hair, after fixing the groups, they simply won't show up in Poser. The log says:
DSONPoser Starting Fri Apr 6 19:05:45 2018 creating Scene DSON Importer Setup DSON Write Path: D:/User/Owner/Documents/Poser 11 Content/Runtime/DSON/auto_adapted Parsing DSON File... File Path: D:/User/Owner/Documents/Poser Storage 2017/Runtime/libraries/Character/DSON Conversions/OOT Classic Bob Hair/Classic Bob Hair Genesis 8 Female1.duf JSON interpreter warning: Unexpected string member: subd_normal_smoothing_mode JSON interpreter warning: Unexpected numeric member: scale JSON interpreter warning: Unexpected numeric member: offset JSON interpreter warning: Unexpected boolean member: invert JSON interpreter warning: Unexpected numeric member: horizontal_tiles JSON interpreter warning: Unexpected numeric member: horizontal_tiling_offset JSON interpreter warning: Unexpected numeric member: vertical_tiles JSON interpreter warning: Unexpected numeric member: vertical_tiling_offset Json Parser (1467510,7): Interpreter Error -
Poser Pro 11 (always updated to current version available) . Laptop Specs: Intel Core i7-7700 CPU @ 3.60GHz 3.60 GHz :: 16 GB Ram :: Windows 10 Pro
TaishoBee posted at 6:19AM Sat, 07 April 2018 - #4327598
Hi! When I try to use some hair, after fixing the groups, they simply won't show up in Poser. The log says:
DSONPoser Starting Fri Apr 6 19:05:45 2018 creating Scene DSON Importer Setup DSON Write Path: D:/User/Owner/Documents/Poser 11 Content/Runtime/DSON/auto_adapted Parsing DSON File... File Path: D:/User/Owner/Documents/Poser Storage 2017/Runtime/libraries/Character/DSON Conversions/OOT Classic Bob Hair/Classic Bob Hair Genesis 8 Female1.duf JSON interpreter warning: Unexpected string member: subd_normal_smoothing_mode JSON interpreter warning: Unexpected numeric member: scale JSON interpreter warning: Unexpected numeric member: offset JSON interpreter warning: Unexpected boolean member: invert JSON interpreter warning: Unexpected numeric member: horizontal_tiles JSON interpreter warning: Unexpected numeric member: horizontal_tiling_offset JSON interpreter warning: Unexpected numeric member: vertical_tiles JSON interpreter warning: Unexpected numeric member: vertical_tiling_offset Json Parser (1467510,7): Interpreter Error -
Unfortunately, those errors are from the DSON Importer. The hair's DUF file contained setting the Importer can't handle. You have to remove those setting from the DUF file. Looks like you have to turn off the some smoothing mode.
willdial posted at 2:29AM Sun, 08 April 2018 - #4327634
Unfortunately, those errors are from the DSON Importer. The hair's DUF file contained setting the Importer can't handle. You have to remove those setting from the DUF file. Looks like you have to turn off the some smoothing mode.
I'm not good with DS. Can you please tell me where to find that so I can disable it?
Poser Pro 11 (always updated to current version available) . Laptop Specs: Intel Core i7-7700 CPU @ 3.60GHz 3.60 GHz :: 16 GB Ram :: Windows 10 Pro
Hello, I just wanted to ask something, I was following the tutorial of lululee, and everything was great, I could load genesis 3 in T pose on poser 11 with xl library manager, from here I noticed something strange, genesis 3 appeared without her textures and without that black outline, I did not give importance to that detail, since I was very happy to finally have genesis 3 in poser 11, I searched and loaded her textures manually, then I could load her hair, her clothes, all right, until it was time to load poses, and her arms, head, and left toes behaved strangely. Then I restarted the poser scene and just loaded genesis 3 and i went directly to load poses. This is how she behaves.
I m using DSON 1.1.3.49, I got “Genesis3StarterEssentialsFemale” from Daz3d, Poser Pro 11 64 bits, OS: Windows 7. I didnt touch the “Genesis3PoserUpdater”, becuase I didnt get to that part yet. Just in case some extra info is that I can use genesis 2 without any problem. If anyone knows how to fix this problem with genesis 3, I will be very grateful. Thanks in advance.
Hello everyone, This initiative has been truly awesome and welcome. But I have gone and experimented with Genesis 8 with a lot of success except for one...the lashes. For some reason I could not get the G8 F lashes to become visible in Poser 11. Eventually I used the Oh My Lashes for G8 and now it shows up on Shangrila 8 (which I purchased at Renderosity before it was moved and restricted to DAZ) in Poser 11. When she is put in a pose where her eye lids move the lashes still do not move. Anybody with any solutions?
WayneManderson posted at 6:05PM Mon, 07 May 2018 - #4329561
Hello everyone, This initiative has been truly awesome and welcome. But I have gone and experimented with Genesis 8 with a lot of success except for one...the lashes. For some reason I could not get the G8 F lashes to become visible in Poser 11. Eventually I used the Oh My Lashes for G8 and now it shows up on Shangrila 8 (which I purchased at Renderosity before it was moved and restricted to DAZ) in Poser 11. When she is put in a pose where her eye lids move the lashes still do not move. Anybody with any solutions?
I'm currently testing a new version of the Updater that supports the Genesis 8 Eyelashes. Hopefully, it will be out soon.
thank you so much for making this, allowing me to stay with my favorite software!
A question: If i want to buy some different characters for G3/G8, do I need to apply those within DAZ first, and then do the importing process, or can it be done within poser once you already have the basic G3/G8 in there?
also, I run through the entire process and managed to bring G3/V7 into my poser, but i have no head expression morphs whatsoever, either before or after implementing the updater. any ideas?
Update: I also miss the twist dial on her thighs, and symmetry doesn't work properly :( (left arm/leg to right arm/leg, etc...).
I believe I cover this issue in this Webinar: https://my.smithmicro.com/poserwebinars/how-to-import-and-render-genesis-3-into-poser-11-Webinar-replay.html
It could be several things. First the installer adds four files. The error is saying it can find one the files. You might want to uninstall and reinstall the Updater.
Second, the Updater uses .Net Framework 4.5. The installer checks for it. But, Windows 10 will report it as installed when it really isn't.
NobbyC posted at 12:45PM Mon, 11 November 2019 - #4369790
Hi jocker2000, the "Genesis3 Updater" overwrites your old CR2 file. You must open only your old file an then it should work.
Thank you. Yes the old file is overwritten, I see that in the date, but the expressions still don't work when I laod this updated file to poser. What could be the reason?
It seems some other people have also the issue, that the face-expressions do not work in the updated file. In my case there is no difference in the behavior of the face expressions between the exported file from DAZ and the updated file. The face expressions just a bit and wrong. I set the limit of the smile to 5 an get this result, also in the updated g3m.
I use DAZ 4.12, Poser 11.2 and DSON 1.2.0.12 in windows 10
In the preferences of the DSON I have an "writible Runtime Folder" this folder is tnot the same like my DAZ runtime. could that be the reason?
Is there any chance to solve this issue? To change the DSON writible Runtime Folder has no effect. I have still no correct face expresion morphs after updating the file, I've tried the whole precedure so many times. I think I make everything exactly how UserGuide desciption
Is there anybody with an idea what could be the reason?
parkdalegardener posted at 5:21AM Thu, 14 November 2019 - #4370169
I hope I'm wrong for your sake; but, to the best of my knowledge, the expression morphs are never going to work. No body ever got them functioning correctly after genesis 2.
I thought it should work with this Genesis 3/8 updater tool?
joker2000 posted at 6:04AM Thu, 14 November 2019 - #4370170
parkdalegardener posted at 5:21AM Thu, 14 November 2019 - #4370169
I hope I'm wrong for your sake; but, to the best of my knowledge, the expression morphs are never going to work. No body ever got them functioning correctly after genesis 2.
I thought it should work with this Genesis 3/8 updater tool?
'Fraid not. These tools get Genesis 3/8 into Poser but they do not (again too the best of my knowledge) get the expression morphs to work.
parkdalegardener posted at 10:44AM Thu, 14 November 2019 - #4370171
joker2000 posted at 6:04AM Thu, 14 November 2019 - #4370170
parkdalegardener posted at 5:21AM Thu, 14 November 2019 - #4370169
I hope I'm wrong for your sake; but, to the best of my knowledge, the expression morphs are never going to work. No body ever got them functioning correctly after genesis 2.
I thought it should work with this Genesis 3/8 updater tool?
'Fraid not. These tools get Genesis 3/8 into Poser but they do not (again too the best of my knowledge) get the expression morphs to work.
Realy, so this tool is just a joke?
Hi jocker2000, the "Genesis3 Updater" works fine for me.
I tried to reproduce your problem but on my computer the "Genesis3 Updater" works and the expressions too.
What i do is that:
This i "Vickie 7" with "Vickie 8" textue.
Thank you. I tried it again, but no expressions work. The behavior of all figures are the same. the exported file from DAZ and the saved and updatet file from poser. All figures have absolutley the same behavior. No faceexpressions.
It seam it does not work on all PCs. That could be anything but nobody knows why. So I think it will not work for me. I don't belief that poser will bring any figures that I can use anytime. DAZ figuras are lightyears ahead. To work with G2 was good so far, but now I want to go ahead. Maybe poser software is better then DAZ, but what good does it do me if the content is bad.
I will have no choice but to switch to DAZ in long term . It's a pity, Because I like Poser.
NobbyC posted at 3:48AM Fri, 15 November 2019 - #4370252
May be you can try to install or activate "Net Framework 4.5" on your system the "Genesis3 Updater" works only with this version.
I thought it works with "Net framework 3.5"? The updater had istalled Framework 3.5 by itself
I have 3.5 and 4.8 on my PC
Hi joker200p, ich hatte anfangs auch Probleme mit NET Frameworks. Ich bin mir aber nicht mehr sicher wie ich es damals ans laufen bekommen habe. Du musst wen es läuft noch die config datei ändern wie ich es weiter oben beschriebenen habe. Da Windows in Deutschland einen Punkt anders liest als ein Komma.
NobbyC posted at 4:14PM Fri, 15 November 2019 - #4370302
Hi joker200p, ich hatte anfangs auch Probleme mit NET Frameworks. Ich bin mir aber nicht mehr sicher wie ich es damals ans laufen bekommen habe. Du musst wen es läuft noch die config datei ändern wie ich es weiter oben beschriebenen habe. Da Windows in Deutschland einen Punkt anders liest als ein Komma.
Oh wow! Du bist ein Held, das war's tatsächlich. Ich habe den Punkt durch ein Komma ersetzt und jetzt geht's. Super cool! Sollten jetzt auch zusätzliche Morphs von Charakteren, Musklen usw funktionieren wenn ich sie mit den G3 Figuren zusammen aus Daz exportiere? Das wär echt cool, wenn ich die jetzt in Poser hätte, ich werde mit DAZ Studio irgendwie einfach nicht warm. Blender und Poser sind eigentlich die Programme mit denen ich arbeite. Morgen werdeich noch mehr ausprobieren . Werde morgen grad noch mehr ausprobieren :-)
Vielen dank nochmals
So it works perfect now. Also with additional morphs and characters with G3. G8 does not work. Poser crashed as I try to load the expoted file from DAZ. But that's not so important. I am happy with G3 and its mor realistisc mouvings. speacialy the new bones in the hands and in the toes wich I missed in G2
Thank you for your support. Lets make Poser great again
So, now I also get G8M into Poser. It seams to work fine exept the eyelashes. As as soon I conform the eyelashes to G8M they get invisible. I still see them in the preview mode as black lines, but in render they are invisible at all. Also I think the lashes are not positionated exactly. Is there a solution for this?
Hi joker2000, das kann verschiedene Uraschen haben.
Ich fange am besten am Anfang an, auch wen ich denke das du die ersten Schritte genau so gemacht hast.
Hi NobbyC
Ich habe jetzt alles angegeguckt und verschiedenes durchprobiert. Die eyelashes sind erst sichbar, sobald ich sie aber "conforme to G3M" werden sie unsichtbar. Wenn ich das conforming wieder zu None rausnehme bleiben sie trotzdem unsichtbar.
Im Mat room sehe ich keine "None" bei den Marerials. Dort ist "Eyeslasches und "Eyesmoisture". Auch chache leeren hat nichts gebracht. Und das Transfer zu active Morphs hat auch die Positionierung nicht verbessert.
This site uses cookies to deliver the best experience. Our own cookies make user accounts and other features possible. Third-party cookies are used to display relevant ads and to analyze how Renderosity is used. By using our site, you acknowledge that you have read and understood our Terms of Service, including our Cookie Policy and our Privacy Policy.
When you have problems like this.
,
Try to change your "Genesis3PoserUpdater.exe.config" file.
The value="0.30" to value="0,30"
Then you have to clear the DSON cache and reimport your "genesis 3/8" figure again.
This solution help`s on my computer.