OK, I have done the versions for injecting the 116A-Hi and 116A-lo geometries. Constructing the files was much easier than I expected, due in large part to the obj files matching the group names. Thanks again for that. The only glitches so far were due to my inevitable typographical errors.

Only done the most cursory testing so far. Made sure that the mesh did not break up, the welding stayed intact, that the BlueEcho texture loaded, that the JCM seems to work, and that it will survive a save and reload to pz3.

odf: can you send me split up version of the "Antonia-116-altUVs.obj" and "Antonia-116-lo-altUVs.obj", and I'll do the same for those.

Then I will get down to some serious testing.

In the meantime, in case anyone wants to try out the geom swap for themselves, I have attached above the text of the "116A-Hi-Geom.pz2". This file can be used on the "Antonia-116-altUVs" figure to revert to the standard 116 geometry/UVs. The file can be placed in any pose folder, loose the ".TXT" part of the file extension. You will also need to install odf's obj files from this link:

http://www.renderosity.com/mod/rrfilelock/download.php?fileid=39006&key=8529