Will the standalone texture transformer ever be upgraded with new figures?

 The TransMorph tool was added to version 6 hoping that some of our more experienced users would create additional figure support, while we focused on wrapping up a lot of little loose ends on Blacksmith3D.  But it is very time consuming to get a texture transfer that's about 98% accurate, so no one has considered doing that yet. We maybe reaching out to some of the experienced users we know to see if can get something done, but we are not able to make any commitments to additional figures.

I just want to make sure you know about and got the updates when Roxie and Genesis 2 females were added. If not, you can re-download the file from the forum header above and install.

Yes I have all the addons but it has been some time since they were created.Was just wondering if any additional addons were in the works.It just seems like the people that bought the standalone software are ignored.

 The TransMorph tool was added to version 6 hoping that some of our more experienced users would create additional figure support, while we focused on wrapping up a lot of little loose ends on Blacksmith3D.  But it is very time consuming to get a texture transfer that's about 98% accurate, so no one has considered doing that yet. We maybe reaching out to some of the experienced users we know to see if can get something done, but we are not able to make any commitments to additional figures.

I just want to make sure you know about and got the updates when Roxie and Genesis 2 females were added. If not, you can re-download the file from the forum header above and install.

am I the only one not happy with this reply?

 The TransMorph tool was added to version 6 hoping that some of our more experienced users would create additional figure support, while we focused on wrapping up a lot of little loose ends on Blacksmith3D.  But it is very time consuming to get a texture transfer that's about 98% accurate, so no one has considered doing that yet. We maybe reaching out to some of the experienced users we know to see if can get something done, but we are not able to make any commitments to additional figures.

I just want to make sure you know about and got the updates when Roxie and Genesis 2 females were added. If not, you can re-download the file from the forum header above and install.

We got sold a pig in a poke.

I might as well have taken the money I paid for this and lit it on fire.

I am so disappointed with the vendor on this.  This product had so much potential.

Thanks ssgbryan

I was starting to think I was alone on this.

Where are the instructions for the Transmorph tool? Also are there instructions anywhere for what it takes to make a figure compatible with the texture transformer?

The Transmorph Tool is only available in Pro 6 which is $209.Then you have to learn how to create the figure support files on your on.Smells like a ripoff to me.

Deecey posted at 7:18PM Tue, 01 September 2015 - #4225911

Where are the instructions for the Transmorph tool? Also are there instructions anywhere for what it takes to make a figure compatible with the texture transformer?

Thank you, yes I have Pro 6. I was just wondering what the steps were to make a figure compatible with Texture Transformer. I can't seem to find the steps anywhere.

Sorry Deecey I didn't mean to sound like an ass i am just mad that Blacksmith refuses to update the software that was supposed to be so great for transforming textures.It makes me look bad because I had suggested it to other people and now they thumb their noses at us.The instructions for creating the support files start on page 139 of the manual.I downloaded the trial of V6 pro but the Transmorph tool will not work.

Please understand that Renderosity bought Blacksmith3D and it was the previous owner who had made some general mentions of future figure support. There were no direct mentions of how many, when, which figures or how much the additional figure support would cost. Though the previous one man show didn't supply additional figure support, we (Renderosity) added the V4 to Roxie and the V4 to Genesis 2 female support. And, we did not want to make any additional type of general statements about possible figure support that could get taken as a commitment. So, I'm sorry that you're mad that our comments about "no plans at this time" and not wanting to make commitments we are unsure about give a wrong impression that we "refuse" to update the software. We haven't 'refused' to update. In fact, we've stated that we would 're-visit' Texture Transformer after we worked through our known bug reports for our Blacksmith3D version 6.

The good news is version 6 has another update coming soon to wrap up the last couple minor known issues in B3d. We have been a bit silent for a few weeks because we have been working on some additional figure support for our Texture Transformer. We will have maybe one or two figure supports as part of a free update, but there will likely be an "add-on" pack with a small cost to help offset the large expenses associated with these additions. I hope to be making more formal announcements about it within the next two weeks.

Blacksmith3D posted at 2:01PM Sun, 20 September 2015 - #4229301

Please understand that Renderosity bought Blacksmith3D and it was the previous owner who had made some general mentions of future figure support. There were no direct mentions of how many, when, which figures or how much the additional figure support would cost. Though the previous one man show didn't supply additional figure support, we (Renderosity) added the V4 to Roxie and the V4 to Genesis 2 female support. And, we did not want to make any additional type of general statements about possible figure support that could get taken as a commitment. So, I'm sorry that you're mad that our comments about "no plans at this time" and not wanting to make commitments we are unsure about give a wrong impression that we "refuse" to update the software. We haven't 'refused' to update. In fact, we've stated that we would 're-visit' Texture Transformer after we worked through our known bug reports for our Blacksmith3D version 6.

The good news is version 6 has another update coming soon to wrap up the last couple minor known issues in B3d. We have been a bit silent for a few weeks because we have been working on some additional figure support for our Texture Transformer. We will have maybe one or two figure supports as part of a free update, but there will likely be an "add-on" pack with a small cost to help offset the large expenses associated with these additions. I hope to be making more formal announcements about it within the next two weeks.

From your own product info.

Currently supported transformations

• Victoria 4.2 (Daz) to Dawn (Hivewire3D)
• Victoria 4.2 to Roxie 1.1 (Poser/SmithMicro)
• Victoria 4.2 to Genesis 2 Female (Daz)

with more transformations planned for the future.

Sorry! That was definitely missed when the product was bought out. Regardless, we have been working on M4 to Dusk and M4 to Genesis 2 male, and hope to have them released as a free update within the next two weeks. But, since you are unhappy with it, we will gladly give you (and any others) a refund provided you email us at info@blacksmith3d.com with a confirmation that it has been removed from your system.

Best Regards!

The Blacksmith 3D manual in the section devoted to Texture Transformer says to see the manual for the stand-alone program. I originally bought the stand-alone program (you folks got me squared away on that when I had problems by upgrading B3D to Pro, which incorporates TT). I've looked at my original download and see no manual for TT. Nor do I find it on your website. Where can I find that? Cheers.

Hello RobZhena,

I am looking for it. Seems it was misplaced during our Blacksmith3D website change. We will send you a link as soon as it is located. Thanks for letting us know.

Muchas gracias.

It seems I have lost the Texture Transformer instructions. I'm going to type up new ones and send to you. My apologies for the delay in getting this to you.

Here is a link to the Texture Transformer manual. Texture Transformer Manual