ssgbryan opened this issue on Jan 11, 2018 ยท 37 posts
ssgbryan posted Thu, 11 January 2018 at 9:58 AM
When can we see a plug-in for Project Evolution?
There is money for that burning a hole in my pocket.
fly028 posted Fri, 12 January 2018 at 12:08 AM Forum Moderator
Hello ssgbryan,
I will let Renderosity staff answer to this question. Creating a TT plugin is quite long...
Best regards,
ssgbryan posted Fri, 12 January 2018 at 12:35 AM
fly028 posted at 11:34PM Thu, 11 January 2018 - #4322115
Hello ssgbryan,
I will let Renderosity staff answer to this question. Creating a TT plugin is quite long...
Best regards,
If they want to keep Poser users buying products here, they may want to get cracking on it.
FVerbaas posted Sat, 13 January 2018 at 3:08 PM Forum Coordinator
Could I second this request? PE has received a warm welcome in the community and I think there will be lots of interest.
Biscuits posted Sun, 14 January 2018 at 3:24 AM
PE is turning out to be very popular amongst the Poser Community.
A texture transformer plugin from V4 to Project Evolution would be welcomed by many.
Blacksmith3D posted Mon, 15 January 2018 at 10:52 AM
There is a hefty cost for each individual conversion (around $1500 each) from one figure to one other figure (like V4 to PE). So, it would be very costly to try to make ALL figure conversions for PE, and we need to see a pretty good user request list for it. It would be good for us to know which conversions make the most sense for our users. I'm guessing V4 to PE, since V4 probably has the largest library of character texture options.
Figure options might be something like: V4 to PE G2F to PE Dawn to PE or G3F to PE
So, these 4 conversions would cost us around the $6000 mark, and we'd need to at least break-even on it. If the requests are just for one conversion, like V4 to PE that would be a LOT easier to get done.
ghostman posted Mon, 15 January 2018 at 12:27 PM
Well then we can just start with V4 2 PE. 
"Dream like you'll live forever. Live like you'll die tomorrow."
ssgbryan posted Mon, 15 January 2018 at 6:21 PM
Blacksmith3D posted at 5:19PM Mon, 15 January 2018 - #4322285
There is a hefty cost for each individual conversion (around $1500 each) from one figure to one other figure (like V4 to PE). So, it would be very costly to try to make ALL figure conversions for PE, and we need to see a pretty good user request list for it. It would be good for us to know which conversions make the most sense for our users. I'm guessing V4 to PE, since V4 probably has the largest library of character texture options.
Figure options might be something like: V4 to PE G2F to PE Dawn to PE or G3F to PE
So, these 4 conversions would cost us around the $6000 mark, and we'd need to at least break-even on it. If the requests are just for one conversion, like V4 to PE that would be a LOT easier to get done.
People that have PE are the hardcore of the Poser community (You know, the folks 'Renderosity has been ignoring.) If we have a V4 to PE, then we don't actually need the others, we can use the other plug-ins.
Dawn to V4 then V4 to PE G2F to V4 then V4 to PE G3F to V4 then V4 to PE
OTOH, I wouldn't sweat the DS figures; PE isn't coming to DS anytime soon, and I don't see folks with a heavy g figure investment interested in PE.
wimvdb posted Tue, 16 January 2018 at 7:14 AM
I would love to see a V4 to PE conversion
erogenesis posted Tue, 16 January 2018 at 1:36 PM
Blacksmith3D posted at 9:32PM Tue, 16 January 2018 - #4322285
There is a hefty cost for each individual conversion (around $1500 each) from one figure to one other figure (like V4 to PE). So, it would be very costly to try to make ALL figure conversions for PE, and we need to see a pretty good user request list for it. It would be good for us to know which conversions make the most sense for our users. I'm guessing V4 to PE, since V4 probably has the largest library of character texture options.
Figure options might be something like: V4 to PE G2F to PE Dawn to PE or G3F to PE
So, these 4 conversions would cost us around the $6000 mark, and we'd need to at least break-even on it. If the requests are just for one conversion, like V4 to PE that would be a LOT easier to get done.
Hi Sir, thanks for considering to do something like this. Indeed along the lines of what the others are saying, most folks I've seen play with PE have been converting V4 stuff from what I can tell, so it would indeed be wise to just kick it off with a V4 > PE kit. Based on how well that does you could consider doing other kits too, but for now I think you'll make a lot of V4 fans very happy with that!
"The fool is not the one that does something foolish, but the one that does nothing at all."
Boni posted Thu, 25 January 2018 at 12:46 PM
Count me on board with a V4 to PE converter!!! Woo Hoo!!
Boni
"Be Hero to Yourself" -- Peter Tork
bwldrd posted Sat, 03 February 2018 at 10:35 AM
Well I thought I had added a "Me to" to this post earlier, but it's not to be seen. Sooooo...
Me to!! For supported PE conversion :)
--------------------------------------------------------------------------------
Consider me insane if you wish, but is your reality any better?
FVerbaas posted Sun, 11 February 2018 at 3:59 AM Forum Coordinator
I think V4 would be the best basis to start with.
FVerbaas posted Sun, 11 February 2018 at 4:26 AM Forum Coordinator
Just wondering: if matching the shapes of the figures is part of the process, could the morph for V4 to match PE shape (in the PE dev pack) help to cut down the cost of the conversion?
ghostman posted Sat, 03 March 2018 at 5:35 AM
vinnyfranklin posted Fri, 09 March 2018 at 7:01 PM
KickStarter, just saying.
ghostman posted Wed, 28 March 2018 at 10:57 AM
DreaminGirl posted Mon, 02 April 2018 at 10:36 AM
Another vote for V4 to PE
ghostman posted Sun, 08 April 2018 at 4:06 AM
bwldrd posted Mon, 09 April 2018 at 3:38 AM
I'm not holding my breath. By time it is released (if ever), PE will be in its tenth itteration. Lol
--------------------------------------------------------------------------------
Consider me insane if you wish, but is your reality any better?
FVerbaas posted Wed, 25 July 2018 at 7:18 AM Forum Coordinator
You can breathe again now: She has been released on Content Paradise and on CGB .
bwldrd posted Wed, 25 July 2018 at 8:37 AM
FVerbaas posted at 8:36AM Wed, 25 July 2018 - #4333675
You can breathe again now: She has been released on Content Paradise and on CGB .
Lol, I didn't mean PE, as I already had her. I meant a TT plug-in for her :)
--------------------------------------------------------------------------------
Consider me insane if you wish, but is your reality any better?
RobZhena posted Fri, 27 July 2018 at 3:44 PM
A v4 to PE conversion would be fantastic! For what it's worth, I use the V4 to Pauline converter you folks finally came through with.
RobZhena posted Fri, 27 July 2018 at 4:41 PM
Screw this. I will pay you $1,500 to make the V4 to Evolution ONE TT converter. I am serious. If you are serious, contact me.
JohnDoe641 posted Sun, 29 July 2018 at 12:38 AM
Going by the dates replies were posted it doesn't look very promising but I'm adding my vote for V4 to PE support.
pruiz posted Mon, 20 August 2018 at 11:04 AM
My vote for V4 to PE!
FVerbaas posted Thu, 20 September 2018 at 3:31 PM Forum Coordinator
V4 to PE would be the obvious choice.
TrekkieGrrrl posted Tue, 25 September 2018 at 6:28 PM
Oh me too. I just bought the new Blacksmith (on subscription) and I'm amazed at the texture converter. Now, if it could make my zillions of V4 textures available to PE .. Well .. wouldn't that be grand?
FREEBIES! | My Gallery | My Store | My FB | Tumblr |
You just can't put the words "Poserites" and "happy" in the same sentence - didn't you know that? LaurieA
Using Poser since 2002. Currently at Version 11.1 - Win 10.
manihoni posted Thu, 04 October 2018 at 12:44 AM
My vote for V4 to PE. when TT plug-in for "V4 to PE" is released, I will purchase the newest Blacksmith3D-Pro. (I have old Blacksmith3D-Paint v3.3, now)
yooshiii posted Sat, 06 October 2018 at 8:14 AM
My vote for V4 to PE
calvados posted Fri, 19 October 2018 at 12:59 AM
My vote for V4 to PE
estherau posted Sat, 20 October 2018 at 12:02 AM
Me too. V4 to PE. any news about this? Love esther
I aim to update it about once a month. Oh, and it's free!
CobraBlade posted Sat, 03 November 2018 at 6:45 PM
Heck, if adding support for V4 to PE means we'll see manihoni create one of his amazing characters for Project Evolution, it's worth it!
ruscular3d posted Mon, 03 December 2018 at 1:46 AM
I would love to convert v4 to PE! But first I need help with v4 to dawn. I just bought the subscription deal.
TMD64 posted Fri, 14 December 2018 at 3:23 PM
Just got PE and would love to get V4 to PE also
ruscular3d posted Fri, 14 December 2018 at 8:28 PM
Be sure to check out the freebie for a FTC face texture convertor from V4 to PE from FVerbaas https://www.renderosity.com/mod/freestuff/face-texture-converter/80554
kobamax posted Fri, 24 May 2019 at 6:54 AM
I agree with V4 to PE too. It is good to be able to power up V4 characters that have been familiar for a long time.:)