Welcome to the Poser - OFFICIAL Forum

Forum Moderators:  Digitell, CHMedia    Forum Coordinators:  RedPhantom

Poser - OFFICIAL F.A.Q (Updated: 2020 May 06 10:25 am)


 Subject: Is there a way to make a slider for an expression?

RAMWolff opened this issue on May 20, 2020 · 63 posts

Top of Forum Print

  EldritchCellar    ( ) ( posted at 7:14PM Wed, 09 September 2020  · @4399055

Eye and Jaw part transformations need to be recorded in other ways. And boy is THAT an understatement lol.



W10 Pro, HP Envy X360 Laptop, Intel Core i7-10510U, NVIDIA GeForce MX250, Intel UHD, 16 GB DDR4-2400 SDRAM, 1 TB PCIe NVMe M.2 SSD

Mudbox 2020, Adobe PS CC, Poser Pro 11.3, Blender 2.8, Wings3D 2.2.5, D&D 5E, Astonishing Swordsmen and Sorcerers of Hyperborea 2E, Lamentations of the Flame Princess


My Freestuff and Gallery at ShareCG




  EldritchCellar    ( ) ( posted at 7:19PM Wed, 09 September 2020  · @4399056

You might want to read this thread... it may contain some information about things you've asked about in the past. At the time I was too tired to answer...

The latter part with my correction morph info, and the process of subtracting a morph, might be of interest. Although you might not see it, the solution to some of your morph problems is contained in the demo...

https://www.renderosity.com/mod/forumpro/?thread_id=2951278



W10 Pro, HP Envy X360 Laptop, Intel Core i7-10510U, NVIDIA GeForce MX250, Intel UHD, 16 GB DDR4-2400 SDRAM, 1 TB PCIe NVMe M.2 SSD

Mudbox 2020, Adobe PS CC, Poser Pro 11.3, Blender 2.8, Wings3D 2.2.5, D&D 5E, Astonishing Swordsmen and Sorcerers of Hyperborea 2E, Lamentations of the Flame Princess


My Freestuff and Gallery at ShareCG




  RAMWolff    ( ) ( posted at 7:55PM Wed, 09 September 2020  · @4399058

Thank you so much! 😁

---Wolff On The Prowl---

  RAMWolff    ( ) ( posted at 9:23AM Thu, 10 September 2020  · @4399094

Thank you for the link by the way. Reading now.

Oh and the import through the Head Properties doesn't work....

This is Expression 01 dialed... I did go ahead after this issue below and try to load the export in as a full body morph and it doesn't do anything. This is a mess!

Expression 01 Oooops.png

---Wolff On The Prowl---

  EldritchCellar    ( ) ( posted at 10:56AM Thu, 10 September 2020  · @4399103

I can't make my instructions any more clear. But I'll try.

That's a scaling issue. I'll try one more time. If you look at the 2 morph packages that I released as freebies for La Femme you'll find head morphs and FBMs with dependencies created via both Spawn and the Dependency Editor. Including the copy centers command in some of them. ALL working. In Injection Files. Now you tell me that nope this doesn't work. Nope that doesn't work. Nope this doesn't work.

But Ok...

Here's La Femme... I loaded her and Zero Figure. Turned off IK. Went to her head and made a goofy simple expression with the face chips...

2020-09-10 (1).png



W10 Pro, HP Envy X360 Laptop, Intel Core i7-10510U, NVIDIA GeForce MX250, Intel UHD, 16 GB DDR4-2400 SDRAM, 1 TB PCIe NVMe M.2 SSD

Mudbox 2020, Adobe PS CC, Poser Pro 11.3, Blender 2.8, Wings3D 2.2.5, D&D 5E, Astonishing Swordsmen and Sorcerers of Hyperborea 2E, Lamentations of the Flame Princess


My Freestuff and Gallery at ShareCG




  EldritchCellar    ( ) ( posted at 11:04AM Thu, 10 September 2020  · @4399106

File: Export

WaveFront Object

Click Universe to clear Hierarchy

Select only Head

20200910_120037.png

3.png



W10 Pro, HP Envy X360 Laptop, Intel Core i7-10510U, NVIDIA GeForce MX250, Intel UHD, 16 GB DDR4-2400 SDRAM, 1 TB PCIe NVMe M.2 SSD

Mudbox 2020, Adobe PS CC, Poser Pro 11.3, Blender 2.8, Wings3D 2.2.5, D&D 5E, Astonishing Swordsmen and Sorcerers of Hyperborea 2E, Lamentations of the Flame Princess


My Freestuff and Gallery at ShareCG




  EldritchCellar    ( ) ( posted at 11:13AM Thu, 10 September 2020  · @4399107

Export. ALL BOXES UNCHECKED.

Named morph target Blah.

Zero La Femme.

Go to Head Properties

Load Morph Target.

Load Blah Obj.

Dial to 1 Blah morph dial...

4.png

6.png

7.png



W10 Pro, HP Envy X360 Laptop, Intel Core i7-10510U, NVIDIA GeForce MX250, Intel UHD, 16 GB DDR4-2400 SDRAM, 1 TB PCIe NVMe M.2 SSD

Mudbox 2020, Adobe PS CC, Poser Pro 11.3, Blender 2.8, Wings3D 2.2.5, D&D 5E, Astonishing Swordsmen and Sorcerers of Hyperborea 2E, Lamentations of the Flame Princess


My Freestuff and Gallery at ShareCG




  EldritchCellar    ( ) ( posted at 11:15AM Thu, 10 September 2020  · @4399109

Here's the Injection File...

Blah INJ...

https://drive.google.com/file/d/1_JBtZNUt5_LtFP9Zdh7ShEcghB29d0rQ/view?usp=drivesdk



W10 Pro, HP Envy X360 Laptop, Intel Core i7-10510U, NVIDIA GeForce MX250, Intel UHD, 16 GB DDR4-2400 SDRAM, 1 TB PCIe NVMe M.2 SSD

Mudbox 2020, Adobe PS CC, Poser Pro 11.3, Blender 2.8, Wings3D 2.2.5, D&D 5E, Astonishing Swordsmen and Sorcerers of Hyperborea 2E, Lamentations of the Flame Princess


My Freestuff and Gallery at ShareCG




  EldritchCellar    ( ) ( posted at 11:19AM Thu, 10 September 2020  · @4399110

Literally takes like 10 minutes to do. 1 morph target. With pictures. And an INJ.

An expression morph derived from deformations created by face bones... o o



W10 Pro, HP Envy X360 Laptop, Intel Core i7-10510U, NVIDIA GeForce MX250, Intel UHD, 16 GB DDR4-2400 SDRAM, 1 TB PCIe NVMe M.2 SSD

Mudbox 2020, Adobe PS CC, Poser Pro 11.3, Blender 2.8, Wings3D 2.2.5, D&D 5E, Astonishing Swordsmen and Sorcerers of Hyperborea 2E, Lamentations of the Flame Princess


My Freestuff and Gallery at ShareCG




  RAMWolff    ( ) ( posted at 1:14PM Thu, 10 September 2020  · @4399126

I figured it out with some hints from Cliff. Seems that L'Homme loads into Poser at 0.500 %. This should be looked at by Rendo to make sure this is universal throughout including making sure it works that way for content creators. What I had to do was just put him at 0.000 and all the expressions exported and reimported were fine after that.

All that was left to do was add in the morphs for my fibermesh eyebrows (which I can't seem to save out as a CR2, crashes Poser! BUT they work great in the scene file so I MAY have to just save out the Scene file as a product load file if that will work! They imported fine, they conformed fine and they take morph targets fine like my expressions but exporting them as a CR2 .... for what ever reason they crash Poser! They were created in ZBrush and have been used for Genesis with no issues! I refitted them to L'Homme since I'm making a Poser version of Gino for him that sort of matches the Gino I made for Genesis 8 Male so I wanted similar elements to be exact like the brows. So not sure what's going on with them when trying to save them out as a conformer in CR2 format.

---Wolff On The Prowl---

  EldritchCellar    ( ) ( posted at 1:25PM Thu, 10 September 2020  · @4399129

Ah. I see. I just assumed that L'Homme would be at default scale and operate like La Femme. To be honest I don't think I've ever even looked at L'Homme.

Judging from all the content creator horror stories related to the figure that I've seen, not much incentive to ever bother...

Glad you got it sorted.



W10 Pro, HP Envy X360 Laptop, Intel Core i7-10510U, NVIDIA GeForce MX250, Intel UHD, 16 GB DDR4-2400 SDRAM, 1 TB PCIe NVMe M.2 SSD

Mudbox 2020, Adobe PS CC, Poser Pro 11.3, Blender 2.8, Wings3D 2.2.5, D&D 5E, Astonishing Swordsmen and Sorcerers of Hyperborea 2E, Lamentations of the Flame Princess


My Freestuff and Gallery at ShareCG




  RAMWolff    ( ) ( posted at 1:46PM Thu, 10 September 2020  · @4399135

😁

---Wolff On The Prowl---

 To create a post you must first sign in or register an account.

Privacy Notice

This site uses cookies to deliver the best experience. Our own cookies make user accounts and other features possible. Third-party cookies are used to display relevant ads and to analyze how Renderosity is used. By using our site, you acknowledge that you have read and understood our Terms of Service, including our Cookie Policy and our Privacy Policy.