Welcome to the Poser - OFFICIAL Forum

Forum Moderators: Digitell, CHMedia Forum Coordinators: RedPhantom

Poser - OFFICIAL F.A.Q (Last Updated: 2021 Sep 19 9:23 am)


Subject: Is there an add-on "exploder" program for Poser 11?


vxg139 ( ) posted Fri, 11 June 2021 at 11:14 PM · edited Sun, 19 September 2021 at 2:29 PM

Hi,

Just curious if there is an add-on program to Poser 11 that would break "props" into (user defined) number of segments... similar to PhilC's "Exploder"? I can't get PhilC's "Exploder" to work with Poser 11 ...hence my question!

Thank you all for your support/advice. :c))


EldritchCellar ( ) posted Sat, 12 June 2021 at 4:34 PM

Just because no one has answered...

I haven't seen a replacement for that. You might try asking this same question over in the Poser Python forum, there's a member by the name of ADP that frequents there that might find it interesting. Who knows he might whip up some code similar?



W10 Pro, HP Envy X360 Laptop, Intel Core i7-10510U, NVIDIA GeForce MX250, Intel UHD, 16 GB DDR4-2400 SDRAM, 1 TB PCIe NVMe M.2 SSD

Mudbox 2022, Adobe PS CC, Poser Pro 11.3, Blender 2.9, Wings3D 2.2.5


My Freestuff and Gallery at ShareCG




EldritchCellar ( ) posted Sat, 12 June 2021 at 5:06 PM

so I did a little looking around and recalled that a member named Ockham had an Exploder Script tucked away on his site. I was doubtful it would work in Poser 11 but after some testing, turns out it works. I'll post a mini tutorial on how to use it... First you'll need the script, which can be found here...

http://ockhamsbungalow.com/Python/

it's about halfway down the page.



W10 Pro, HP Envy X360 Laptop, Intel Core i7-10510U, NVIDIA GeForce MX250, Intel UHD, 16 GB DDR4-2400 SDRAM, 1 TB PCIe NVMe M.2 SSD

Mudbox 2022, Adobe PS CC, Poser Pro 11.3, Blender 2.9, Wings3D 2.2.5


My Freestuff and Gallery at ShareCG




EldritchCellar ( ) posted Sat, 12 June 2021 at 5:09 PM

Then you'll need the free version of UVMapper classic which can be found here...

http://www.uvmapper.com/downloads.html



W10 Pro, HP Envy X360 Laptop, Intel Core i7-10510U, NVIDIA GeForce MX250, Intel UHD, 16 GB DDR4-2400 SDRAM, 1 TB PCIe NVMe M.2 SSD

Mudbox 2022, Adobe PS CC, Poser Pro 11.3, Blender 2.9, Wings3D 2.2.5


My Freestuff and Gallery at ShareCG




vxg139 ( ) posted Sat, 12 June 2021 at 5:21 PM

EldritchCellar.. you are true STAR~! Thank you so much for your help.... :c)))

Kindest Regards,

vxg139


EldritchCellar ( ) posted Sat, 12 June 2021 at 5:23 PM

Ok. Load/import the model you want to explode, in this case I'm going to be using a low poly ant model that I have...

Render 1.png



W10 Pro, HP Envy X360 Laptop, Intel Core i7-10510U, NVIDIA GeForce MX250, Intel UHD, 16 GB DDR4-2400 SDRAM, 1 TB PCIe NVMe M.2 SSD

Mudbox 2022, Adobe PS CC, Poser Pro 11.3, Blender 2.9, Wings3D 2.2.5


My Freestuff and Gallery at ShareCG




EldritchCellar ( ) posted Sat, 12 June 2021 at 5:35 PM

Sorry, you want to run the model through UVMapper Classic first. Load the model in UVMapper Classic, go to Edit menu: Tools: Split Vertices. Save your Model. THEN import into Poser...

2021-06-12 (2) copy.png

2021-06-12 (4) copy.png



W10 Pro, HP Envy X360 Laptop, Intel Core i7-10510U, NVIDIA GeForce MX250, Intel UHD, 16 GB DDR4-2400 SDRAM, 1 TB PCIe NVMe M.2 SSD

Mudbox 2022, Adobe PS CC, Poser Pro 11.3, Blender 2.9, Wings3D 2.2.5


My Freestuff and Gallery at ShareCG




EldritchCellar ( ) posted Sat, 12 June 2021 at 5:42 PM

Back in Poser Select the model and run the Python Script. I just ran it through File: Run Python Script... The script has some options, see the ReadMe that comes with the script

2021-06-12 (5).png



W10 Pro, HP Envy X360 Laptop, Intel Core i7-10510U, NVIDIA GeForce MX250, Intel UHD, 16 GB DDR4-2400 SDRAM, 1 TB PCIe NVMe M.2 SSD

Mudbox 2022, Adobe PS CC, Poser Pro 11.3, Blender 2.9, Wings3D 2.2.5


My Freestuff and Gallery at ShareCG




EldritchCellar ( ) posted Sat, 12 June 2021 at 5:46 PM

This will generate a morph target called explode in the model... dial to taste.

Render 2.png

Sorry so sloppy, in the middle of working in another program. Glad I could help.



W10 Pro, HP Envy X360 Laptop, Intel Core i7-10510U, NVIDIA GeForce MX250, Intel UHD, 16 GB DDR4-2400 SDRAM, 1 TB PCIe NVMe M.2 SSD

Mudbox 2022, Adobe PS CC, Poser Pro 11.3, Blender 2.9, Wings3D 2.2.5


My Freestuff and Gallery at ShareCG




vxg139 ( ) posted Sat, 12 June 2021 at 5:52 PM

You are truly awesome! Do you have a store at Renderosity?


EldritchCellar ( ) posted Sat, 12 June 2021 at 6:05 PM

No. Maybe sometime in the future, more than likely. Kind of obsessed with JCMs and morphs in an old abandoned free japanese figure at the moment. I have a bunch of unfinished commercial target things for La Femme. I'll probably resume that once finished my current project... or resume building another free figure that I was working on. I like to tinker. I appreciate you asking though, it's very kind.



W10 Pro, HP Envy X360 Laptop, Intel Core i7-10510U, NVIDIA GeForce MX250, Intel UHD, 16 GB DDR4-2400 SDRAM, 1 TB PCIe NVMe M.2 SSD

Mudbox 2022, Adobe PS CC, Poser Pro 11.3, Blender 2.9, Wings3D 2.2.5


My Freestuff and Gallery at ShareCG




vxg139 ( ) posted Sat, 12 June 2021 at 6:09 PM · edited Sat, 12 June 2021 at 6:12 PM

Well.. should you develop clothing/accessories/skin textures for V4, just let me know! :c)) 10+ years on, and still prefer V4 to any other characters (new or old)!...She is an eye catching character + can be used directly in Poser!!! :c)))

I have pretty much purchased everything for V4 (both here and DAZ3D)! :c)))

Thanks again for your awesome help....

Kindest regards,

vxg139


EldritchCellar ( ) posted Sat, 12 June 2021 at 6:20 PM

She's a good figure, I like V4 too. Karina's Sasha 16 is my preferred flavor for pin up type stuff.

Take care.



W10 Pro, HP Envy X360 Laptop, Intel Core i7-10510U, NVIDIA GeForce MX250, Intel UHD, 16 GB DDR4-2400 SDRAM, 1 TB PCIe NVMe M.2 SSD

Mudbox 2022, Adobe PS CC, Poser Pro 11.3, Blender 2.9, Wings3D 2.2.5


My Freestuff and Gallery at ShareCG




randym77 ( ) posted Sat, 12 June 2021 at 6:39 PM

You might be able to get an update to PhilC's Exploder script. You could email him and ask.


SamTherapy ( ) posted Mon, 14 June 2021 at 8:14 AM
Online Now!

AFAIK, Phil retired a while ago.

Coppula eam se non posit acceptera jocularum.

My Store

My Gallery


EldritchCellar ( ) posted Mon, 14 June 2021 at 8:32 AM

He did. He might still answer queries though, says he still does support for Wardrobe Wizard... ?

20210614_092915.jpg



W10 Pro, HP Envy X360 Laptop, Intel Core i7-10510U, NVIDIA GeForce MX250, Intel UHD, 16 GB DDR4-2400 SDRAM, 1 TB PCIe NVMe M.2 SSD

Mudbox 2022, Adobe PS CC, Poser Pro 11.3, Blender 2.9, Wings3D 2.2.5


My Freestuff and Gallery at ShareCG




wolf359 ( ) posted Wed, 16 June 2021 at 2:37 AM

Too bad the poser physics plugin was never updated.



My website

YouTube Channel



randym77 ( ) posted Wed, 16 June 2021 at 5:02 AM

Wow, PhilC really did retire. He was still selling stuff in his store not long ago, but now the store's closed.

I know he did update the Exploder script awhile back, so it would work with new versions of Poser, but I don't know if that includes Poser 11. Definitely doesn't include Poser 12.


Privacy Notice

This site uses cookies to deliver the best experience. Our own cookies make user accounts and other features possible. Third-party cookies are used to display relevant ads and to analyze how Renderosity is used. By using our site, you acknowledge that you have read and understood our Terms of Service, including our Cookie Policy and our Privacy Policy.