Forum: Carrara

Subject: question beginning requested reply quickly

Perfect_One opened this issue on Mar 28, 2004 · 5 posts

Perfect_One posted Sun, 28 March 2004 at 5:32 PM

Attached Link: http://www.alsr7.com/upload/files/jpg/elbow.jpg

welcome all friends How I am able manufacture this models by Carrara wants the way of the model manufacture requested the interest from the experts :) Nawaf

Hoofdcommissaris posted Mon, 29 March 2004 at 1:33 AM

Read the manual about the Spline Modeller and use the pipeline extrusion mode. It should be fairly easy.

Perfect_One posted Mon, 29 March 2004 at 1:35 PM

thank u Hoofdcommissaris But person wants the way by explanation How can able For manufacture of the model ... Nawaf

mdesmarais posted Mon, 29 March 2004 at 2:51 PM

Assuming you are talking about the bend, try this- 1) Make a straight pipe in the Spline Modeller 2) In the Assembly room, apply a Bend modifier set up like this- Markd

mdesmarais posted Mon, 29 March 2004 at 2:53 PM

Can't edit post? Just wanted to add- you can get the curve as tight as you want by adjusting the Limits slider. Markd