Hmm.  I'm testing the V3 transfer files on the unimesh figures.  The flaws and errors which aren't so noticeable on V3 show up more prominently when trying to work with another figure.  Aiko gets mostly there, but there are some problems with the nose, mouth corners, and possibly lower eyelashes. 

This image actually shows the Aiko head after being loaded as a morph on V3, then ported to Antonia that way.  The shape transfer directly from Aiko gets most of the way there, but the nose is very obviously wrong.  So I'm going to have to work a bit more on the V3 data file before it's fully effective, particularly for application across the unimesh line.

Some minor GUI debugging for both scripts, fixing situations which could cause Python errors.

http://www.the.cage.page.phantom3d.net/TDMT_Match/TDMT_Match_Transfer2.zip

http://www.the.cage.page.phantom3d.net/TDMT_Match/TDMT_Match_Compare1.zip

If you've previously installed the scripts, just overwrite the .py files.

The .pmd for V3 also had errors.  I neglected to put the .pmd extension on the filename in the INJ and REM poses.

===========================sigline======================================================

Cage can be an opinionated jerk who posts without thinking.  He apologizes for this.  He's honestly not trying to be a turkeyhead.

Cage had some freebies, compatible with Poser 11 and below.  His Python scripts were saved at archive.org, along with the rest of the Morphography site, where they were hosted.