Forum: Rhino 3D

Subject: Can't find the ABCarter gem cutting tutorial. So, here's a redux.,,

Stegy opened this issue on May 11, 2006 · 22 posts

Stegy posted Thu, 11 May 2006 at 12:53 PM

12.  Time to cut the upper facets.  This will be very similar to cutting the bottom facets.  First, rotate the cylinder by -11.25 degrees along the z-axis.  This will put it back to its original orientation.  Add another cube as was done in step 1.  Rotate the cube along the y-asis by 58 degrees.